このページの内容

説明

The <clover-setup> task initialises Clover for use with your project.

The basic nesting of elements within the <clover-setup> task is as follows:

パラメーター

All attributes of the <clover-setup> element support Java. However, as indicated in the last column of the following table, some of these attributes do not support Groovy.

属性	説明	必須	Groovy Support
clovercompiler	After instrumentation, Clover hands off compilation to the standard Ant compiler adapter (or the compiler specified by the build.compiler Ant property). This attribute specifies the adapter to use. It takes the same values as the standard Ant build.compiler property. If you wish to specify an alternative compiler, you can either set the build.compiler property or use this attribute.	いいえ。
enabled	This controls whether Clover will instrument code during code compilation. This attribute provides a convenient control point to enable or disable Clover from the command line.	No; defaults to 'true'.
flushinterval	When the flushpolicy is set to interval or threaded this value is the minimum period between flush operations (in milliseconds)	いいえ。
flushpolicy	This attribute controls how Clover flushes coverage data during a test run. Valid values are directed, interval, or threaded. directed — Coverage data is flushed at JVM shutdown, and after an inline flush directive. interval — Coverage data is flushed as fordirected, as well as periodically at a maximum rate based on the value of flushinterval. This is a 'passive' mode in that flushing potentially occurs as long as instrumented code is being executed. threaded — Coverage data is flushed as for directed, as well as periodically at a rate based on the value of flushinterval. This is an 'active' mode in that flushing occurs on a separate thread and is not dependent on the execution of instrumented code. For more information, see Using a Flush Policy.	No; defaults to 'directed'.
fullyQualifyJavaLang	This should only be set to 'false' if you have defined a variable called 'java' in your source files. If false, Clover will instrument source files without using fully qualified java.lang names.	No; defaults to 'true'.
initstring	The Clover initString describes the location of the Clover coverage database. Typically this is a relative or absolute file reference, e.g. ${basedir}/build/clover.db. If not specified it defaults to .clover/clover.db, relative to the project's base directory.	いいえ。
instrumentationLevel	This setting can reduce accuracy to method level, to enhance the speed of instrumentation, compilation & test execution. Valid values are 'method' and 'statement'.	No; defaults to statement.
instrumentLambda	Since 3.2.2. Whether Java 8 lambda functions shall be instrumented. If instrumented, they're treated like normal methods (and can be shown in HTML report and considered in code metrics, for example). Possible values: none - do not instrument lambda functions, expression - instrument lambdas in expression-like form, e.g. "(a, b) -> a + b", block - instrument lambdas in code blocks, e.g. "(a, b) -> { return a + b; }" all_but_reference - instrument lambdas written in any form except method references, e.g. "Math::abs" (option is available since Clover 4.0.5) all - instrument all lambda functions. Due to Clover's restrictions related with code instrumentation and javac compiler's type inference capabilities, you may get compilation errors when expression-like lambda functions are passed to generic methods or types. In such case disable instrumentation of expression-like form (i.e. use the none or block setting). See the Java 8 code instrumented by Clover fails to compile Knowledge Base article for more details.	No; defaults to "all" in 3.2.2-4.0.2 and to "none" since 4.0.3.
preserve	A boolean attribute which controls whether the instrumented source will be retained after compilation.	No; defaults to 'false'.
recordTestResults	If set to 'false', test results will not be recorded; instead, results can be added via the <testResults> fileset at report time. For more details please see 'Advanced Usage'.	No; defaults to 'true'.
relative	This controls whether the initstring parameter is treated as a relative path or not.	No; defaults to 'false'.
ソース	The default source level to process source files at. Note that setting the source attribute on the <javac> target will override this setting.	いいえ。
tmpdir	The directory into which Clover will write an instrumented copy of the source code.	いいえ。

It is important to note that the Clover compiler adapter still picks up its settings from the set of Clover Ant properties. The <clover-setup> task provides a convenient method to set these properties. This means that builds that use the Clover 1.0 property set will continue to operate as expected.
Do not set the 'compiler' attribute on the <javac/> task as this overrides the Clover compiler set up by <clover-setup>. Use the 'clovercompiler' attribute instead.

Nested Elements

<distributedCoverage>

This element, which supports both Java and Groovy, turns on Clover's distributed coverage feature, enabling the collection of per-test coverage data, when your test environment requires more than one JVM (Java Virtual Machine).

パラメーター

All attributes are optional.

<files>

An Ant patternset, relative to the top level package (e.g. com/atlassian/clovertest), element which controls which files are included or excluded from Clover instrumentation. Use this when you wish to exclude files based on packages.

<fileset>

As of Clover 1.2, <clover-setup> also supports multiple Ant <filesets>. These give greater flexibility in specifying which source files are to be instrumented by Clover. This is useful when you have more than one source base and only want some of those source bases to be instrumented. This can be difficult to setup with patterns. Filesets also allow much greater flexibility in specifying which files to instrument by facilitating the use of Ant's fileset selectors. Use this when you wish to exclude files based on directory structure.

int getNumber() {
   return number;
}

ActionListener getListener() {
   return new ActionListener() {
       public void actionPerformed(ActionEvent e) {
           System.out.println("statement #1");
           System.out.println("statement #2");
           System.out.println("statement #3");
       }
   };
}

<methodContext name="trivial" regexp=".*" maxStatements="1">

<methodContext name="trivial" regexp=".*" maxAggregatedStatements="1">

<methodContext name="trivial" regexp="^(?!.*(getRunnable|getListener)).*$" maxStatements="1"/>

<profiles>
  <profile name="default" coverageRecorder="FIXED|GROWABLE|SHARED">
    <distributedCoverage/> <!-- optional -->
  </profile>
  <profile .../>
  <!-- more profiles -->
</profile>

<testsources>

<testsources> is an Ant fileset which should only be used if Clover's default test detection is not adequate. Clover's default test detection algorithm is used to distinguish test cases if this element is omitted.

Nested elements of <testsources>

<testclass>

<testclass> can be used to include only specific test classes.

パラメーター

For more information about regular expressions, please visit http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/Pattern.html#sum.

<and>

<and> can be used to specify multiple instances of <testclass>, all of which must be matched for a class to be detected as a test, e.g.:

<testsources dir="tests">
<and>
  <testclass annotation="Specification"/>
  <testclass annotation="Test"/>
</and>
<testsources>

In this example, a class will only be recognized as a test if it has "Specification" and "Test" annotations.

<or>

<or> can be used to specify multiple instances of <testclass>, any of which must be matched for a class to be detected as a test, e.g.:

<testsources dir="tests">
<or>
  <testclass name=".*Spec"/>
  <testclass name=".*Test"/>
</or>
<testsources>

In this example, a class will be recognized as a test if its name matches ".*Spec", or its name matches ".*Test".

Nested elements of <testclass>

<testmethod>

<testmethod> can be used to perform more fine grained detection of test methods.

Clover matches methods only; it does not match constructors (CLOV-1339).

パラメーター

Note that you can include multiple instances of <testmethod>, in which case they will be treated as 'or' clauses, e.g.:

<testsources dir="tests">
  <testclass>
    <testmethod annotation="Specification"/>
    <testmethod name="^should.*"/>
    <testmethod name="^must.*"/>
  </testclass>
<testsources>

In this example, a method will be recognized as a test if its annotation is "Specification", or its name matches "^should*", or its name matches "^must*".

例

<clover-setup/>

This example is the minimal setup to use Clover. In this case, the Clover coverage database is located in the .clover relative directory.

<clover-setup enabled="${enable}">
     <files>
       <exclude name="**/atlassian/clover/**/*.java"/>
     </files>
</clover-setup>

This example shows the use of a property, "enable", to control whether Clover instrumentation is enabled. Additionally, the instrumentation will exclude all Java source files in trees belonging to the com.atlassian.clover.* packages (please note, that even if the files belong in the src/main or src/test directory, you cannot specify src, main or test as these are directories and do not belong to the package structure. When using files, you need to filter by files or the packages as in the example above). Note that the fileset can also be referenced using a refid attribute.

<clover-setup enabled="${coverage.enable}">
     <fileset dir="src/main">
       <contains text="Joe Bloggs"/>
     </fileset>
</clover-setup>

This example instruments all source files in the src/main directory tree that contain the string "Joe Bloggs". Ant's filesets supports a number of these selectors. Please refer to the Ant manual for information on these selectors.

Interval Flushing

By default Clover will write coverage data to disk when the hosting JVM exits, via a shutdown hook. This is not always practical, particularly when the application you are testing runs in an Application Server. In this situation, you can configure Clover to use "interval" flushing, where coverage data is written out periodically during execution:

<clover-setup flushpolicy="interval"
                flushinterval="5000"/>

The "flushinterval" defines in milliseconds the minimum interval between coverage data writes.

Specifying a delegate compiler

Clover provides the optional "clovercompiler" attribute to allow specification of the java compiler to delegate to once instrumentation is completed. The attribute accepts the same values "compiler" attribute of the Ant Javac Task.

<clover-setup clovercompiler="jikes"/>

This example will pass compilation to the "jikes" compiler once instrumentation is complete.

Specifying the location of the Clover Coverage database

By default, Clover writes its internal database to the .clover/clover.db file relative to the project's base directory. To override this location, use the initstring attribute, e.g.:

<clover-setup initstring="clover-db/coverage.db" />

This example will use clover-db/coverage.db as the location for the Clover database. Note that the directory clover-db should exist before running this task.

Specifying a custom test matcher

By default, Clover attempts to detect your test classes and methods. Clover's default behavior may be overridden via the following:

<clover-setup>
     <testsources dir="src">
         <include name="**/*Test.java"/>
         <testclass name=".*Test">
             <testmethod name=".*Bag.*"/> <!-- only the Bag related tests -->
         </testclass>
     </testsources>
</clover-setup>

This example tells Clover to recognize all of the following as tests: classes in the directory "src"; classes in files whose names end with "Test"; methods whose names contain with "Bag".

トラブルシューティング

Clover does not support parallel compilation

You cannot use <parallel/> task for code compilation, for instance:

<target name="init">
  <clover-setup/> 
</target>

<target name="compile" depends="init">
  <parallel>
    <javac srcdir="module1" .../>
    <javac srcdir="module2" .../>
  </parallel>
</target>

will produce error message like:

[clover] Error finalising instrumentation:
   [clover] java.io.IOException: Failed to move tmp registry file /myproject/.clover/clover3_1_6.db.tmp to final registry file