Running Bamboo as a Linux service



アトラシアン コミュニティをご利用ください。


Linux system administration is outside the scope of Atlassian support. This page is provided for your information only.

On Linux/Solaris, the best practice is to install, configure and run each service (including Bamboo) as a dedicated user with only the permissions they require.

To install, configure and get Bamboo to start automatically on Linux/Solaris:

  1. Create a bamboo user account that will be used to run Bamboo. For example, enter the following at a Linux console:

    sudo useradd --create-home -c "Bamboo role account" bamboo
  2. Create a directory into which Bamboo will be installed. For example:

    sudo mkdir -p /opt/atlassian/bamboo
    sudo chown bamboo: /opt/atlassian/bamboo
  3. Log in as the bamboo user to install Bamboo:

    sudo su - bamboo
  4. You need to extract Bamboo:

    cd /opt/atlassian/bamboo
    tar zxvf /tmp/atlassian-bamboo-X.Y.tar.gz
    ln -s atlassian-bamboo-X.Y/ current
  5. Edit current/atlassian-bamboo/WEB-INF/classes/ and set bamboo.home=/var/atlassian/application-data/bamboo (or any other directory of your choice, but not the same as Bamboo's installation directory)
  6. Proceed with the service configuration. There are two options included below for creating the service configuration, which one you will use will depend on your Linux distribution:

Systemd Service Configuration

Suitable for modern distributions such as:

  • Ubuntu 15
  • CentOS 7
  • RHEL 7

For anything older see the SysV Init Script section below.

Systemd will ignore environment variable definitions placed in /etc/environment as well as other traditional environment variable definitions from Sys-V init. If one needs to define environment variables when running Bamboo as a systemd unit then the variable definitions need to be placed in the unit file.

The examples below are designed for Bamboo Server. If you want to automate the Remote Agent service, simply replace ExecStart/ExecStop instructions with:

ExecStart=<bamboo-agent-home>/bin/ start sysd
ExecStop=<bamboo-agent-home>/bin/ stop sysd

Environment=CATALINA_PID and PIDFile properties can be removed as the Remote Agent startup is controlled by a service wrapper.

  1. Create a bamboo.service file in your /etc/systemd/system directory

    Description=Atlassian Bamboo

    The values for <bamboo-user> and <bamboo-install> should be replaced with your Bamboo user and the path to your Bamboo Install directory, respectively. CATALINA_PID and PIDFile are also declared, this way systemd knows which java process to monitor.

  2. Enable the service to start at boot time by running the following in a terminal:

    systemctl enable bamboo.service
  3. Stop Bamboo using the provided Bamboo stop script (<bamboo-install>/bin/ and restart your system to check that Bamboo starts as expected
  4. Use the following commands to manage the service:

    Disable the service:

    systemctl disable bamboo.service

    Check that the service is set to start at boot time:

    if [ -f /etc/systemd/system/*.wants/bamboo.service ]; then echo "On"; else echo "Off"; fi

    Manually start and stop the service:

    systemctl start bamboo
    systemctl stop bamboo

    Check the status of Bamboo:

    systemctl status bamboo
SysV Init Script

  1. As root, create the file /etc/init.d/bamboo (code shown below), which will be responsible for starting up bamboo after a reboot (or when manually invoked).

    set -e
    # Provides: bamboo
    # Required-Start: $local_fs $remote_fs $network $time
    # Required-Stop: $local_fs $remote_fs $network $time
    # Should-Start: $syslog
    # Should-Stop: $syslog
    # Default-Start: 2 3 4 5
    # Default-Stop: 0 1 6
    # Short-Description: Atlassian Bamboo Server
    # INIT Script
    # Define some variables
    # Name of app ( bamboo, Confluence, etc )
    # Name of the user to run as
    # Location of application's bin directory
    case "$1" in
      # Start command
        echo "Starting $APP"
        /bin/su - $USER -c "export BAMBOO_HOME=${BAMBOO_HOME}; $BASE/bin/ &> /dev/null"
      # Stop command
        echo "Stopping $APP"
        /bin/su - $USER -c "$BASE/bin/ &> /dev/null"
        echo "$APP stopped successfully"
       # Restart command
            $0 stop
            sleep 5
            $0 start
        echo "Usage: /etc/init.d/$APP {start|restart|stop}"
        exit 1
    exit 0
  2. 初期化スクリプトを実行可能にします:

    chmod a+x /etc/init.d/bamboo
  3. シンボリックリンクをランレベルのディレクトリに配置し、このスクリプトの開始と停止を自動的に行えるようにします。 

    1. Debian ベースのシステムの場合:

      update-rc.d bamboo defaults


      Adding system startup for /etc/init.d/bamboo ...
         /etc/rc0.d/K20bamboo -> ../init.d/bamboo
         /etc/rc1.d/K20bamboo -> ../init.d/bamboo
         /etc/rc6.d/K20bamboo -> ../init.d/bamboo
         /etc/rc2.d/S20bamboo -> ../init.d/bamboo
         /etc/rc3.d/S20bamboo -> ../init.d/bamboo
         /etc/rc4.d/S20bamboo -> ../init.d/bamboo
         /etc/rc5.d/S20bamboo -> ../init.d/bamboo
    2. RedHat ベースのシステムの場合:

      tip/resting Created with Sketch.

      init.d スクリプトに chkconfig 設定が含まれています

      sudo /sbin/chkconfig --add bamboo
  4. スクリプトが正しい順序で実行されるようにします (特にデータベースの起動スクリプトの後に実行されるように)。

Note: If starting your new bamboo service fails immediately with an error, it may be that your /etc/init.d/bamboo script has had carriage return characters introduced into it. You can confirm this by running: 

cat -v /etc/init.d/bamboo

If there are carriage return characters in your /etc/init.d/bamboo script, they will appear as ^M in the output: 

set -e^M
# Provides: bamboo^M
# Required-Start: $local_fs $remote_fs $network $time^M
# Required-Stop: $local_fs $remote_fs $network $time^M
# Should-Start: $syslog^M
# Should-Stop: $syslog^M

You can remove carriage return characters from /etc/init.d/bamboo with the following command: 

sed -i -e 's/\r//g' /etc/init.d/bamboo
Retry starting the service after making this change.
Last modified on Mar 15, 2024


Powered by Confluence and Scroll Viewport.