Configure multiple SSH identities for TortoiseHg


This page will redirect to /bitbucket/set-up-additional-ssh-keys-271943168.html .

If you are using TortoiseHg on Windows, you need the following programs to use SSH:

Program 説明
PuTTYgen An RSA and DSA key generation utility. This is a part of the free PuTTY telnet/SSH Client. You can install this package separately from TortoiseHg. You can also install just PuTTYgen.exe into the same directory as TortoiseHg. 
Pageant An SSH authentication agent for PuTTY, PSCP, PSFTP, and Plink. This is installed for you with TortoiseHg.

TortoiseHG connects with Plink and uses Pageant to identify which keys are available. To configure TortoiseHg so that you can access multiple Bitbucket Cloud accounts through SSH, do the following:

If you have a single identity and that is all you need, you can configure a single, global identity instead.

Generate a key pair for a new identity

PuTTYgen creates an identity for both public and private use. You save the private key in a .ppk file. You can also save the public key to a file but that isn't strictly necessary. These instructions assume you are only saving the private key file.

  1. Locate the puttygen.exe executaible in your system and double click the icon to start it.
    The system opens the PuTTY Key Generator dialog.
  2. Press Generate.
    Following the instructions to generate some randomness. When the generation completes, the system displays the public key and a number of other fields:
  3. Edit the Key comment.
    The comment appears in the key list on Bitbucket. Using this comment is a great way to distinguish your keys.
  4. Enter and confirm a key passphrase.

  5. Press Save private key.
    The system prompts you for a location to save the file and a file name. By convention, store your key files in a folder called C:\Users\yourname\.ssh. and give it a .ppk extension.

  6. Close the key generator.

Add your private keys to Pageant

  1. Start Pageant by double clicking its icon.
    By default, TortoiseHG installs the Pageant in the C:\Program Files\TortoiseHG folder. When it is running, Pageant appears in your system tray:
  2. Double-click the Pageant icon to launch the Pagent Key List dialog.
  3. Click the Add Key button.
    The system displays the Select Private Key File dialog.
  4. Navigate to and open the public key file.
  5. Enter the passphrase when prompted:
  6. Press OK.
    Pageant shows your key in the running list.
  7. Add any additional keys.
  8. Press Close to close the dialog.
    Pageant continues to run on your system.

Add your SSH public key to Bitbucket

  1. From your avatar in the bottom left, click Bitbucket settings.
    Bitbucket displays the Account settings page.
  2. Click SSH keys.
    The SSH Keys page displays. It shows a list of any existing keys. Then, below that, a dialog for labeling and entering a new key.
  3. Switch to your local desktop and start the PuTTYgen program.
  4. Press Load.
  5. Navigate to and open your default private key.
  6. Enter your passphrase when prompted and press OK.
    The system displays your public key.
  7. Select and copy the contents of the Public key for pasting into OpenSSH authorized_keys file field.
  8. ブラウザに戻って、新しい鍵の ラベル を入力します。たとえば、既定の公開鍵 など 。
  9. Paste the copied public key into the SSH Key field:
  10. Press Add key.
    The system adds the key and it appears in the SSH Keys listing.
  11. Close PuTTYgen.

Configure Mercurial Compression

When sending or retrieving data using SSH, Git does compression for you. Mercurial does not automatically do compression.  If you are using Mercurial, you should enable SSH compression as it can speed up things drastically, in some cases. To enable compression for Mercurial, do the following:
  1. Start the TortoiseHg Workbench.
  2. Select File > Settings.
  3. Make sure you have the global settings tab selected.
  4. Press Edit File.
  5. Add the following line to the UI section:

    ssh = "TortoisePlink.exe" -ssh -2 -batch -C

    When you are done the file should look similar to the following:

    # Name data to appear in commits
    username = Emma Paris <>
    ssh = "C:\Program Files\TortoiseHg\TortoisePlink.exe" -ssh -2 -batch -C
  6. Press Save to store your settings and close the file.
  7. Press OK to close the settings dialog.

Clone a repository as you normally would

  1. Start TortoiseHG Workbench.
  2. Select File > Clone Repository.
  3. Enter the proper SSH syntax (you can copy this from Bitbucket's repository Overview page) in the Source field.
  4. Enter a Destination for your repository.
    At this point the clone dialog looks similar to the following:
  5. Press Clone.
    The system clones the repository and adds it to your repository registry in TortoiseHg.
  6. Right click the new repository in the registry and choose Settings.
    The system displays the TortoiseHG Settings dialog with the name repository settings tab active.
  7. Press Edit File.
  8. View your current repository configuration.
    You should see something similar to the following:

    default = ssh://

    Go ahead and close the file and the settings dialog.

Switching existing repositories from HTTPS to SSH (optional)

You can change existing repository configurations to use a SSH configuration that makes use SSH. You'll only need to do this for repositories that you have already cloned with HTTPS.

  1. Start TortoiseHG Workbench.
  2. Right click a repository and choose Settings.
    The system displays the TortoiseHG Settings dialog with the name repository settings tab active.
  3. Press Edit File.
  4. View your current repository configuration.
    You should see something similar to the following:

    default =
  5. Change the default value to use the SSH format for that repository.
    When you are done you should see something similar to the following:

    default = ssh://
  6. Press Save to close the editor.

  7. Press OK to close the settings dialog.

Configure a single, global identity

If you only plan on ever using a single identity with your TortoiseHG installation, you can create a global configuration for yourself. To do this, start the TortoiseHG Workbench and do the following:

  1. Choose File > Settings.
    The system opens the settings dialog.
  2. Select the username global settings tab.
  3. Press Edit File.
    The system opens an editor with the C:\Users\username\mercurial.ini file.
  4. Edit the [ui] section and add an identity to the TortoisePlink call:

    # Generated by TortoiseHg setting dialog
    username = yourusername <youremail@yourdomain.ext>
    ssh = "C:\Program Files (x86)\TortoiseHg\TortoisePlink.exe" -ssh -2 -i C:\Users\yourusername\.ssh\keyname.ppk
  5. Press Save to close the editor.
  6. Press OK to close the dialog.

Plink has a number of command line options that TortoisePlink accepts. For more information, see the PuTTYgen documentation.

Last modified on Aug 17, 2017



Not finding the help you need?


Powered by Confluence and Scroll Viewport.